Intended Use; Pause Mode - Grundig KMP 8650 MBC Manual Del Usuario

OPERATION ______________________________
Intended use
▪
This appliance has been designed for domes-
tic use only. It should not be used commercial
purposes.
▪
Do not use the appliance for anything other
than its intended use.
Accessories
Q
Whisker
Used to prepare light foods such as cream,
whipped cream and eggs.
O
Dough hook
Used to knead doughs that contain thick ingredi-
ents, such as bread dough, and to blend addition-
al ingredients (raisins, fruit chips, chocolate chips
etc.) with the dough.
P
Beater
Used to blend ingredients that have the consisten-
cy of cake batter.
M
Splash guard
For safety reasons, you must definitely use this ac-
cessory when blending.
Warning
▪
In all installation procedures, make sure that
the appliance is unplugged and the speed ad-
I
justment knob is in "0" position.
▪
Do not continue until you hear the click. The
upper body may fall down and cause injuries.
Note
▪
Make sure that the upper body is in the higher
position when attaching the bowl
Warning
▪
Make sure that the accessory is fully seated
in place.
Note
▪
Before operating the appliance, place the
splash guard on the bowl
M
ingredients through the feeding chute
out lifting the upper body.
18 ENGLISH
C
.
. You can add
C
L
with-
Note
▪
The appliance will switch to the auto power
saving mode if it is not operated for more than
3 minutes. The LED display
can start stirring or press one of the time setting
H
buttons to start the appliance again.
Warning
▪
Your appliance is equipped with slow start
technology to prevent the ingredients to be
blended from splashing around.
▪
Move the speed adjustment knob
position when there is a power outage while
the appliance is operating or when it is un-
plugged. When the power is restored and
the appliance is plugged in, start from the 1st
step again. The appliance, which has stopped
during operation will not start again until you
move it to "0" position. Turn the speed regu-
lator to the left in order to select the desired
speed level.
Note
▪
The processing time will be displayed in sec-
onds on the LED display
Pause mode
You can press Pause/Start button
ment during operation to pause/start the opera-
tion of the appliance.
The device will stop operating when you press
Pause/Start button J
G
display will also stop.
The time counting will resume when you activate
the speed adjustment knob
Notes
▪
When you move the speed adjustment knob
I
to "0" position, the LED display
time counter will automatically show 00:00.
▪
Maximum counting time of the counter is
09:59 (minute-second). It will automatically
be reset when it exceeds this value. You need
to move the speed adjustment button
position and operate it to activate the counter
again. Turn the speed regulator to the left in
order to select the desired speed level.
G
will turn off. You
I
to "0"
G
during operation.
J
at any mo-
. Time counting on the LED
I
again.
G
of the
I
to "0"