Installation
1. Connect the external power supply to the
included power supply adapter and plug it
into an appropriate power source.
SATA Drive
2. Insert one end of the provided 7-Pin SATA
data cable into the SATA port on the
U338-06N and the other end to the SATA
data port on the SATA hard drive.
3. Connect the included 15-Pin SATA Power
Cable between the included power supply
adapter and the SATA power port on the
SATA hard drive. Go to Step 6.
IDE Drive
4. Align the IDE drive interface on the hard
drive with the appropriate port on the
U338-06N, then gently but firmly insert the
IDE drive interface into it. Be sure the drive
is firmly connected.
5. Connect the included 4-Pin Molex Power
Cable between the included power supply
adapter and the power port on the IDE
hard drive.
(For IDE drives, skip to Step 4)
4