Publicidad
Idiomas disponibles
Idiomas disponibles
● Never plug this unit into a dimmer pack.
● Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6" (15cm)
between this device and a wall.
● Do not attempt to operate this unit, if it becomes damaged.
● This unit is intended for indoor use only; use of this product outdoors voids all warranties.
● During long periods of non-use, disconnect the units main power.
● Always mount this unit un safe and stable matter.
● Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to the point they exit from the unit.
● Cleaning unit should be cleaned only as recommended by the manufacturer.
● Heat –The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
● The unit should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits s marked change in performance.
Operating Instructions
Operating Modes: You can use the unit in 4 ways:
●
Auto Mode-The unit will automatically chase through the different colors.
●
Sound-Active mode–The unit will react to sound, chasing through the built-in programs.
●
DMX control mode – This function will allow you to control each individual units traits with a
standard DMX 512 controller.
●
Master-slave mode – One unit will work as the master in the one of the above three modes, other
units in the chain will work in synchronization towards the master.
DMX Mode: Operating through a DMX controller give the user the freedom to create their own
Programs tailored to their own individual needs. This function also allows you to use your units as spot
lights.
1. This function will allow you to control each individual unit's traits with a standard DMX 512
controller.
2. SUPERPARLED ECO 36 uses 7 DMX channels to operate. Please see "DMX Values and Functions"
for the DMX traits.
3. To run your unit in DMX mode, plug in the unit via the XLR connections to any standard DMX
controller. Set your desired DMX address following the setup specifications that come with your
DMX controller.
LED Operation Menu: LED screen with four touch buttons: MENU, UP, DOWN and ENTER.
1.Press MENU may select the function you want.
2.Press UP or DOWN may adjust the values.
3.ENTER is confirmation button.
Press ENTER will save the setting you want
4.After power off, will keep the current status automatically.
SUPERPARLED ECO 36
.
- 2 -
User Manual/Manual de Uso
EN
Publicidad
