WOOX R7067 Guia De Inicio Rapido página 8

English
3. Install the radiator valve to pipe valve. Take
care during installation that you do not trap
your fingers between the two halves of the
adapter!
4. After installation, press confirm key to enter
into adaptive state.
5. Adaptive operation: the screen has a
scrolling display for "AdA" and "Π". Equipment
checks assembly during the process; if any
problem, the screen will display "F1", "F2" "F3"
and "F4" errors; if assembly is correct,
equipment will enter into normal display
mode.
Notes:
•F1—If valve is driven slowly, check whether
valve is jammed;
F2—If actuation range is too wide, check
whether valve is not installed in place,
whether the screw is tightened.
F3—If adjustment range is too small, check
whether heating valve is blocked and valve
resistance is too large.
F4— The valve is not installed.
5