PUREGEAR PUREJUICE 5K Manual De Instrucciones página 3

Specifications:
Input: 5V/2A | Output: 5V/2.4A
Lithium polymer battery – 5,200 mAh
Charge time approximately 2.5 hours using a
5V/2A adapter
CAUTION:
Do not attempt to disassemble the portable battery
charger. Keep this product in a dry and ventilated space.
Do not place in direct heat or use in high humidity
environments. To protect the battery from short circuits,
do not place inside a drawer or enclosed space. If unused
for a long period of time, the battery may require a few
full charging cycles to work at maximum efficiency. This
battery can only be charged using the provided cable.
Instructions:
The PureJuice 5K portable battery is pre-charged. If your
battery was shipped by sea, it will be 50-75% charged. If it
was shipped by air, it will be less than 30% charged.
To charge the PureJuice 5K using a
WALL CHARGER, CAR CHARGER
or COMPUTER:
1. Use the provided USB 2.0 to Micro
USB cable and insert the Micro plug
into the port on the battery as shown.
2. Plug the USB 2.0 into your existing
wall charger, car charger or computer.
The status indicator lights will flash
to show charging has begun. When
battery is fully charged, the lights
will stop flashing.
Note: Charging times vary based on
the charger method and output
amperage.