Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
SELECT BUTTON
In iPod mode, use this button to confirm the selection.
6.
VOLUME -
Use this button to decrease the volume.
7.
VOLUME +
Use this button to increase the volume.
8.
MEMORY/TIME
In Radio mode, use this button to store the radio stations in the memory
In Clock mode, use this button to adjust the clock.
9.
BAND
In Radio mode, use this button to select AM or FM broadcasting.
In Clock mode, use this button to select 12 hours or 24 hours time mode.
10. FUNCTION/DIM
Use this button to select the radio, aux-in or iPod docking.
Use this button to change the brightness of the display.
11. POWER/ON OFF
Use this button to turn on or turn off the unit.
12. PLAY/PAUSE
In iPod mode, use this button to play or pause the iPod.
13. TUN+/SKIP+
In Radio mode, use this button to search the radio station in upward direction.
In iPod mode, use this button to go to the next track.
14. TUN-/SKIP-
In Radio mode, use this button to search the radio station in backward direction.
In iPod mode, use this button to go back to the beginning of the track being played or go
back to the previous track.
15. MEM+/AL1/SCROLL+
In Radio mode, use this button to select the memory station upward.
In Clock mode, use this button to set the Alarm 1.
In iPod mode, use this button to scroll the menu upward.
16. MEM-/AL2/SCROLL-
In Radio mode, use this button to select the memory station backward.
In Clock mode, use this button to set the Alarm 2.
In iPod mode, use this button to scroll the menu backward.
17. AUX-IN JACK
Connect the unit to the other audio devices.
18. DC JACK
Terminal for connecting the unit to a standard AC outlet via the AC/DC adaptor.
19. RESET BUTTON
Press this button by using a paper clip or like object to restore the unit to its default
settings.
20. iPOD DOCKING
Connection to the iPod.
All manuals and user guides at all-guides.com
- EN 3 -
CONNECTING THE UNIT TO POWER
Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC
wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply is
the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two AA size batteries into the battery compartment of the unit. Be sure to observe the
proper polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the
stored radio stations are preserved in the memory of the unit by means of battery back-up
function.
SETTING THE CLOCK
1.
With the unit powered off, press and hold the MEMORY/TIME button. The hour digit will
begin to flash on the LCD display.
2.
Use the TUN+/SKIP+ button or the TUN-/SKIP- button to adjust the hour.
3.
When the correct hour is selected, press the MEMORY/TIME button again, the minute digit
will begin to flash.
4.
Use the TUN+/SKIP+ button or the TUN-/SKIP- button to adjust the minute.
5.
When the correct time is selected, press the MEMORY/TIME button again
SETTING THE ALARMS
1.
With the unit powered off, press and hold the AL1 or AL2 button. The alarm time hour digit
will begin to flash on the LCD display.
2.
Use the TUN+/SKIP+ button or the TUN-/SKIP- button to adjust the hour.
3.
When the correct hour is selected, press the AL1 or AL2 button again, the alarm time
minute digit will begin to flash.
4.
Use the TUN+/SKIP+ or TUN-/SKIP- button to set AL2 button to adjust the minute.
5.
When the correct minute is selected, press AL1 or AL2 button again to confirm the alarm
time set.
WAKE UP TO RADIO
1.
With the unit powered off, press the AL1 or AL2 button until the following icon appears on
the LCD display.
2.
At the alarm time set, the alarm will activate by radio.
3.
To stop the alarm temporary, press the snooze button.
4.
The alarm will activate again after 9 minutes.
5.
To turn off the alarm, press the POWER ON/OFF button.
- EN 4 -
Publicidad
Tabla de contenido
