Technical Data - BGS technic 8381 Manual De Instrucciones

TROUBLESHOOTING
Error
Too little or no pressure
in the tool
No air in the tool
Unsteady spray jet

TECHNICAL DATA

Working Pressure:
Max. Pressure
Noise Level:
Air consumption
(big air spray gun):
Air consumption
(small air spray gun):
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Possible cause
The pressure reducer has not
been opened
The air hose leaks
The nozzle is jammed
The air supply is being blocked
The paint has not been
thinned enough
Too little paint in the cup
Too high or too low operating
pressure
Dirt and/or residual paint block
the nozzle
3 – 5 Bar (44 - 73 PSI)
6.3 Bar (90 PSI)
LpA: = 75 dB (A)
LwA: = 86 dB (A)
6 cfm
3 cfm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Help
Check the pressure reducer's
setting – open it if necessary
check all connections and seal
leaking components if necessary
Clean lean the nozzle and remove
residual paint/varnish
Check the air supply and the setting
of the pressure reducer – open it if
necessary
Thin down the paint according to its
manufacturer's recommendation
Fill up the cup with paint (watch its
min./max. capacity)
Adjust the operating pressure with
the pressure reducer
clean the nozzle and/or replace it if
necessary
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed