Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
When the light source is damaged or deformed, it should be replaced.
• It is strictly prohibited to exceed the rated technical conditions. User can't modify machine without permission,
offenders should be responsible for the consequence.
• Prohibit to operate with electricity and must operated by professional people when install, connect, adjust and
check.
• The correct method to clean the lens is to use vinegar or household ammonia, wet a clean thin cloth, gently wipe
the lens from the center, also can use water to wipe, but after the water get dry there are some stains, which can
be gently wipe out with a clean dry cloth.
• When the electricity supply is cut off, the broken cable in the light end must be changed by the professional people
in time. The cable size is 3x1.5 m² .
• Identification
• Attention! Please replaced the lens when it is visible damaged. Don't use any glass, window cleaner or hard cloth
to clean the lens.
• When the light is suspended, in addition to use the lamp hook hanging on the hanger. At the mean time, please use
3 mm safety rope, let the hanger and the light to connect, to avoid the occurrence of the light falling.
TECHNICAL PARAMETERS
• Voltage: 210V- 230V 50/ 60Hz
• Rated Power: 160W
• Light Source: COB LED
• Dimming: 8/16bit Linear Dimming
• Color temperature: 3100K
• Zoom mode: auto Zoom
8.
Earth line
N
Null Wire
L
Phase line/ Live Wire
1.0
Front distance should be 1 meter.
Other side except front side distance should be 0.5 meter.
The light is not suitable to install directly in the surface of
the flammable material.
Recycle according to the European Union's requirement of
WASTE ELECTRICAL AND ELECTRONIC
User manual | T160Z-PC-3200 Triton Blue | September 2018 | www.triton-blue.com
• Cri: Ra≥95
• Control Mode: DMX 512
• Channel Mode: 2ch/3ch/4ch
• Protectional Level: IP20
• Lens: PC Lens
Publicidad
Tabla de contenido
