Bialetti FRL01 Instrucciones De Uso página 20

EN
• The appliance was designed only for indoor use and non-extreme tem-
perature conditions; do not leave it exposed to the elements (rain, sun,
etc.).
• The manufacturer accepts no responsibility and the warranty will not
apply for any commercial use, inappropriate handling or use of the ap-
pliance, any damage resulting from use for other purposes, faulty opera-
tions, non-professional repair or failure to comply with the instructions.
• After removing the packaging, and before use, make sure the appliance
and all the attachments are working well. The electrical plug and sheath
should not be cracked or broken. If the conditions described above oc-
cur, immediately unplug the appliance from mains outlet and take it to
an authorized After-Sales Service Centre for necessary checking.
• The packing materials (plastic bags, expanded polystyrene, nails, etc.)
should be kept away from children since they are potential sources of
danger.
• Put the appliance on a fl at, smooth and stable surface. Do not put it
close to/on hot surfaces as heaters, cooking hobs, fl ames and similar;
furthermore, avoid the contact with easily fl ammable objects, as cur-
tains, cloths, paper, etc.
• Before connecting the appliance, make sure the label data correspond
to the mains. The tag is located on the bottom of the appliance body.
• If the plug does not fi t into the wall outlet, have the wall outlet replaced
with another type by a qualifi ed electrician. He/she must also check that
the cord is suitable for the power absorbed by the appliance. In general,
it is not advisable to use an adaptor, multiple sockets, or an extension
cord. If they are necessary, use only simple or multiple adaptors and
extension cords that conform to safety regulations, being careful not to
exceed the load limits indicated on the adaptor and the extension cord,
and the maximum power indicated on the multiple adaptor.
• Do not leave the appliance connected when not in use. Remove the plug
from the mains outlet when the appliance is not used.
It is recommended to power the appliance through a residual current
device (rcd) with a max. operating current of 30 mA.
Connect the appliance to the power mains through an earthed sock-
et.
Avoid unplugging the appliance by pulling the power cord.
2. Warnings
20