Resumen de contenidos para West Elm montauk loveseat
Página 1
Instrucciones de Ensamblaje ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
Página 2
Instrucciones de Ensamblaje 1. Place the loveseat up-side down on a clean smooth surface such as cardboard or carpet. Attach both leg’s (3) (right & left) into the bottom of seat frame, than attach the Centre Support legs (4) into the middle frame, as the below picture.
Página 3
Instrucciones de Ensamblaje 2. Align back with seat frame as shown. Insert bolts (E). Tighten with supplied hex key. Insert plates (B) into the top back of the seat back frames to hold them together. Insert bolts (A). Tighten with supplied hex key.
Página 4
Instrucciones de Ensamblaje 3. Align single unit with corner unit. Insert plate (B) into bottom of both units. Insert bolts (A), tighten with supplied hex key. Align sofa unit with corner unit insert bolts (A), tighten with supplied hex key.