Assembly - HOMEDEPOT Home Decorators RLGV6122 Guía De Uso Y Mantenimiento

Assembly

1
Attaching the feet
□ Carefully tip the vanity (A) backward to expose the drill
holes on the underside near the front.
□
Align the screw in the foot (F) with the hole. Turn the
foot (F) clockwise until the foot (F) is tight against the
vanity. Repeat with the other front foot, then with the
center supprt foot (G) and two back feet (F).
G
3
Securing the basins
CAUTION: Do not over tighten the screws as this
could crack the basin.
□ Position the brackets (BB) so they clamp the basin (C) edge
to the top (B).
□
Thread a nut (CC) and washer (DD) over each screw (AA).
□
Thread the screws (AA) through the spaces in the brackets
(BB), then through the anchor in the top (B).
□
Tighten the screws with a screwdriver, turning it clockwise.
A
F
AA
CC
DD
BB
C
2
Adhering the basins
□ Apply a layer of silicone on the underside of the top (B) along
each basin cutout, where the basins (C) will be in contact.
□
Lower each basin (C) onto the top (B), lining it up with the
cutout.
□
Wipe away any excess silicone.
4
Sealing the basins
□ Apply a bead of silicone sealant where the basins (C) meet
the top (B).
□
Use a clean rag to push in the silicone and wipe away
any excess.
B
4
C
B
C
B
C