Component Identification - Promowide SP1190A Manual De Usuario

COMPONENT IDENTIFICATION

TRANSMITTER
Signal On Indicator (green)
SPEAKER RECEIVER
Power LED
Power On/Off
INSTALLATION
TRANSMITTER
1. Insert the antenna tube into the antenna wire.
2. Connect the supplied AC/DC power adapter to an electrical wall outlet.
3. Plug the AC/DC power adaptor in the DC jack located on the rear of the
transmitter.
4. When the AC adapter is plugged in, the red POWER LED illuminates. If the red
POWER LED does not illuminate, make sure the adapter is plugged in.
Antenna
Power On Indicator (red)
Volume Up/Down Auto Tune
P.2
DC Jack