Functional Description - Bosch PEX 400 AE Manual Original

OBJ_BUCH-1336-001.book Page 17 Friday, November 12, 2010 10:16 AM

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
Intended Use
The machine is intended for dry sanding of wood,
plastic, metal, filler as well as coated surfaces.
Machines with electronic control are also suit-
able for polishing.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Thumbwheel for orbit frequency preselection
2 On/Off switch
3 Dust box, complete (Microfilter System)
4 Sanding plate
5 Auxiliary handle (insulated gripping surface)
6 Handle (insulated gripping surface)
7 Sanding sheet*
8 Alignment aid for sanding sheet*
9 Screws for sanding plate
10 Sanding-plate base
11 Extraction outlet
12 Filter element (Microfilter System)
13 Vacuum hose*
14 Wing nut
15 Screw for auxiliary handle
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Technical Data
Random Orbital
Sander
Article number
Preselection of or-
bital stroke rate
Rated power input
No-load speed n min
0
No-load orbital
stroke rate min
Orbit diameter
Sanding plate
diameter
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 80 dB(A);
Sound power level 91 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
2
tainty K = 1.5 m/s .
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
2 609 004 770 | (12.11.10)
English | 17
PEX 400 AE
3 603 CA4 ...
W 350
-1
2000–10600
-1
4000–21200
mm 5
mm 125
kg 1.9
/II
2
= 8.0 m/s , Uncer-