Operating Instructions - Flex L 21-6 230 Instrucciones De Funcionamiento Originales

Angle grinder L 21-6 230/L 21-8 180/L 24-6 230/L 2100

Operating instructions

WARNING!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Before switching on the angle
grinder
Unpack the angle grinder and check that

there are no missing or damaged parts.
Connect the guard to the clamping flange

with the clamping ring by inserting the
cam on the clamping ring into the groove
on the flange (1.).
Rotate guard hood into the required posi-

tion (2.) and tighten clamping lever (3.)
Attaching the auxiliary handle.

Switch on and off
Brief operation without engaged switch
rocker:
Press and hold down the starting

lockout (1.).
Press the switch (2.).

To switch off, release the switch.

Continuous operation with engaged
switch rocker:
Press and hold down the starting

lockout (1.).
Press and hold down the switch (2.).

Press the locking button (3.).

To switch off, briefly press and release

the switch.
19