Additional safety points for your
rotary hammer
1
Connect the mains plug only when the tool is switched off. After
using, pull the mains plug.
2
Always direct the cable to the rear away from the machine.
3
Persons under 16 years of age are not permitted to operate this
machine.
4
Keep the tool and accessories out of the reach of children.
5
Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
6
Fully unwind cable drum extensions to avoid potential overheating.
7
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and that it is in a safe
electrical condition.
8
Ensure your mains supply voltage is the same as your tool rating plate
voltage.
9
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
10
Always check walls and ceilings to avoid hidden power cables and
pipes.
11
After long working periods, external metal parts and accessories
could be hot.
12
Wear eye protection when operating this tool.
13
Wear ear protectors when using rotary hammer. Exposure to noise
All manuals and user guides at all-guides.com
14
15
5
can cause hearing loss.
Use auxiliary handles supplied with the tool. Loss of control can
cause personal injury.
Hold the tool by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden wiring.
Contact with a 'live' wire will also make exposed metal parts of the
tool 'live' and shock the operator.