Publicidad
Idiomas disponibles
Idiomas disponibles
1. Hour Button
2. Minute Button
3. Alarm Set Button
4. Sleep Button
5. Tuning Control
6. Volume Control/Buzzer
7. Time Set Button
8. AM/FM Band Selector
9. Snooze Button
10. On/Off/Auto Switch
11. 110/220V Switch (Bottom of set)
BOTTOM OF SET: Battery compartment for 9 Volt (6F22) battery (not included).
ELECTRONIC CLOCK OPERATION
1. Before plugging in the AC power cord, please check the rating of your unit, 110/220V Switch (11),
which must match with your household main supply, then plug the AC power plug into the main
power supply accordingly.
2. The clock display will flash on and off.
3. To set the correct time, press the Time Set Button (7) and Hour Button (1) together until the correct
hour is displayed. Press the Time Set Button (7) and the Minute Button (2) together until the correct
minute is displayed.
RADIO OPERATION
1. Slide the ON/OFF/AUTO Switch (10) to 'ON' position.
2. Slide Band Selector (8) to FM or AM position.
3. Turn the Volume Control (6) to desired volume.
4. Turn the Tuning Control (5) to select your favorite station.
5. Antenna
For AM reception, this radio incorporates a highly sensitive ferrite core bar antenna built into the unit.
For FM reception, this set is specially equipped with an external wire as FM antenna. Be sure to
untwist it to fullest length for peak performance.
WAKE TO RADIO
Having selected your station and set the volume at the desired level, proceed as follows:
1. Slide the ON/OFF/AUTO Switch (10) to 'AUTO' position.
2. Press the Alarm Set Button (3) and the Hour Button (1) together until the correct hour is displayed.
Press the Alarm Set Button (3) and the Minute Button (2) together until the correct minute is displayed.
The wake up time is now entered into the timer memory.
3. To check the wake up time, simply press the Alarm Set Button (3) and the clock will show the preset
time. The preset wake up time will continue to be registered in the timer memory and the radio will
switch on by itself at the same time the next day.
4. To switch the radio off, simply press the Alarm Off Button (3).
P-2
WAKE TO BUZZER
Set the controls same with 'Wake to Radio' but Volume Control (6) to 'BUZZER' position. The buzzer can
then be switched off by pressing the Alarm Off Button (3) or it can be converted to the radio by selecting
switch (10) to 'ON' position.
SLEEP TO MUSIC
The radio can be set to switch off automatically for a length of time from 1 minute to 1 hour 59 minutes.
With all the controls preset in the 'Wake to Radio' positions, press the Sleep Button (4) and the Minute
Button (2) together, to count down to the desired sleep time. To switch off the radio before the preset
sleep time period, simply press the Snooze Button (9).
SNOOZE CONTROL
The Snooze Button (9) allows the user an extra sleep time of about 9 minutes after the radio alarm is
switched on at the preset wake up time.
When alarm sounds press Snooze Button (9). Alarm will turn off
and sound again in 9 minutes. This Snooze function can be used repeatedly.
BATTERY BACK-UP
Connect a 9 Volt battery to the terminals inside the battery compartment for the power back-up function.
If the AC power supply is interrupted (as during a storm), the battery supplies power to keep the time
and alarm setting in memory.
NOTE: The display will not be lit and the alarm will not sound until actual power is restored. The battery
only stores your settings in memory during a power failure.
GENERAL CARE
The cabinet can be cleaned with a slightly damp cloth. Make sure the AC cord is disconnected from the
outlet when cleaning.
Avoid leaving the clock radio in direct sunlight or in hot, humid, dusty places.
Keep the set away from heating appliances and appliances that generate noise, such as fluorescent
lamps or motors.
SPECIFICATIONS
Power source
: 110V 60Hz/220V 50Hz
DC back up
: 9V (1!9V 6F22 not included)
Radio frequency : AM 530 – 1700KHz
: FM 88 – 108MHz
Output power
: 0.36 Watt
P-3
Publicidad
