Publicidad
Case Storage Series
Installation Chart
Before you begin, please make sure that you
have all components collected
1
check that all components do not have compatibility problems with each other or with the case
2
if possible, assemble the components outside the case first to make sure they are working
3
keep the motherboard manual ready for reference during installation
4
prepare a Philips screwdriver.
5
01
Remove screws from rear of the case then pull top cover backwards to remove it.
Entfernen Sie die Schrauben an der Gehäuserückseite und ziehen Sie dann die obere Abdeckung zum Entfernen nach hinten.
Retirez les vis à l'arrière du boîtier puis tirez le capot supérieur vers l'arrière pour le retirer.
Retire los tornillos de la parte trasera de la carcasa y luego tire de la cubierta superior hacia atrás para retirarla.
Rimuovere le viti dal retro del case, quindi spingere all'indietro il coperchio superiore per rimuoverlo.
Открутите винты на задней панели корпуса, затем потяните верхнюю крышку назад, чтобы снять её.
取下側板和機殼上方螺絲,依箭頭方向卸下機殼。
取下侧板和机箱上方螺丝,依箭头方向卸下机箱。
ケース後部からネジを外してから、上部カバーを後方に引いて取り外します。
케이스의 후면에서 나사를 제거한 후 상부 커버를 뒤로 당겨 제거합니다.
4
CS280
Publicidad
