Bebecar i-3 Manual De Instrucciones página 13

GB
READ THESE INSTRUCTIONS CAREFULLY BEFORE
USE AND KEEP THEM FOR FUTURE REFERENCE
YOUR CHILD'S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS
WARNING: This pushchair has been designed to be operated as shown in the instructions supplied.
Not to do so may cause damage and render your guarantee void.
1 - TO UNFOLD: When opening the pushchair with the adjustable handle, ensure that the handle is in line with
the main handle.
2 - Pull gently on handle of pushchair, and press down on metal tube of pushchair with your foot as indicated
by the figure, until primary locks engage with a click. The secondary lock will automatically engage.
3 - STEERING - NON-STEERING: The front wheels can be used in either mode.
Slide lever (on both sides of chassis) to the upwards position for steering, as indicated in the figure.
For non-steering wheels press red button and lever will slide in a downward position.
NB: When using your pushchair on rough ground we recommend non-steering mode.
4 - BRAKE OPERATION: To apply brake, press down on pedal.
5 - To release brake, pull up the pedal.
6 - TO REMOVE THE REAR WHEEL: Press lever rearwards and at the same time pull the wheel away from
the axel housing.
7 - TO FIT THE REAR WHEELS: Place axel in axel housing and press inwards.
Check by pulling wheel to confirm latching of the axel.
8 - TO REMOVE THE FRONT WHEEL:
steering button is in a upwards position.
Press red button and at the same time pull the wheel away from the front leg.
9 - TO FIT THE FRONT WHEELS:
in a upwards position.
Press red button and at the same time push wheel housing into front leg, until it locks into position.
Check by pulling wheel to confirm latching of the wheel housing.
10- ADJUSTABLE HANDLE HIGHT: Press the two buttons simultaneously and rise or lower the handle bar as
required.
11- TO FIT CARRYCOT / SEAT: Seat may be forward or rear facing.
Place carrycot / seat runners in attachment points (B) on both sides. Lower into position (A) and lock will
automatically engage.
Ensure seat frame runners are secure at all 4 attachment points (A & B on both sides).
Warning: Check that the pram body or seat unit attachment devices are correctly engaged before use.
TO REMOVE CARRYCOT / SEAT: Push in red button and turn knob while lifting carrycot / seat away from
frame.
12- FOLD PUSHCHAIR:
N.B: Please remember to lock the swivel wheels in the non-steering mode before folding chair.
When folding the pushchair ensure that the adjustable handle is in line with the main handle.
To fold, firstly press the red button and simultaneously, turn the handle collar in the direction of the "FOLD"
and the chair will begin to close.
13- ONLY pushchair i-3:
Tilt the chair forward and continue the folding action until the chassis is fully closed.
14- TO STORE PUSHCHAIR: Fold adjustable handle as shown in the figure.
15- BASKET: To attach the basket, pass the webbing and press-stud through the frame as shown.
Attach the back edge of the basket around the rear cross member.
N.B. The front wheels of this chassis can only be removed if the
N.B. The front wheels of this chassis can only fitted if the steering button is
Operate secondary safety device by pulling the plastic tab.