How To Use - BLACK&DECKER 220UH Manual De Instrucciones

220UHPub1000002304 5/6/05
Product may vary slightly from what is illustrated.
1. Fold-down handle
2. Timer knob
3. Control knob
4. CAUTION indicator
5. Heat sensor patch
6. Front grille
7. Roll-over bars
8. Power indicator
9. Thermostat control
RESET
To restore power, you MUST press the RESET button on the line
cord protection safety device to reactivate the circuit.
A
11:17 AM Page 4
All manuals and user guides at all-guides.com
TEST
3

How to Use

This appliance is intended for hous
Important: For warranty verification
³
The Advanced Safety Technology™
into your heater that offers protectio
·
Included in AST is a shock protecti
with a test button to check operatio
Before Use:
»
1. Press RESET button on line cord
2. Plug into a regular AC electrical
¿
3. Press TEST button and RESET bu
is operating properly. Repeat this
confirm safety device is operatio
use heater. Call appropriate "800
´
At any time, should this unit detect
shut off. To restore power, you mus
protection safety device to reactiva
Important:
During the first few minutes of initi
normal and will quickly disappear.
surface, such as a floor, tabletop, sh
grille openings won't be obstructed
bathrooms or laundry areas, or in a
liquids are used or stored.
Caution: Be sure no other applianc
heater/fan. A circuit overload could
1. Place heater on a flat, stable surf
grille opening won't be obstructe
Do not use in wet/moist location
where paint, flammable, or othe
2. Be sure control knob is in the O
AC outlet.
B
The thermostat will cycle unit on a
temperature level.
5. Turn timer knob to the 1 hr., 2 h
you'd like heater to stay on. The
selected time runs out. To operat
Remember to shut unit Off when
6. To use as a fan without heat, mo
control toward HOT until fan be
this mode.
3. Room Sel
setting for
medium (
(approx. 1
4. Turn therm
desired ro
control to