LEITZ IQ Autofeed Small Office 50 P4 Instrucciones De Uso página 7

Bin full
The shredder will not function when the bin is full and the bin full
symbol is illuminated.
You should empty the bin.
• Pull open the bin slowly to empty.
• Push the empty bin back into place and press the auto button to
resume shredding.
Leitz Clean Empty -to ensure as little mess as possible on all Leitz
machines the bin full icon will flash to tell you to empty the bin.
When flashing you can continue shredding until the bin full icon is
solid, then the bin must be emptied.
Over heating
If the AutoFeed shredder is used continuously without pausing, it
may overheat and the cool down indicator will flash red
allow the shredder to cool down. When the shredder is ready
to be used the thermometer symbol will no longer illuminate. If
the shredder needs to cool down while shredding, no action is
needed. The shredder will automatically restart shredding paper
once it has cooled down after periods of continuous use. All you
need to do is ensure paper is loaded into the chamber and the bin
is empty when the machine is cooling down.
Lubrication of the shredder
Only use Rexel Oil Sheets (8007 00 00) to lubricate. ACCO Brands
accepts no liability for product performance or safety when other
types of lubricants are used on any part(s) of this machine. Rexel
recommend using an oil sheet after the bin has been emptied
three times (and every three bin emptying after this). Insert the
oil sheet into the manual feed slot and NOT in the auto-feed
chamber. Using an oil sheet in the auto-feed chamber will
contaminate the feed rollers preventing the auto-feed mechanism
shredding. Follow the maintenance instructions if the rollers
become contaminated.
Maintenance
The rollers on the auto-feed mechanism may become dirty over
time, please wipe clean with a dry cloth to maintain maximum
product performance.
The auto-start infrared sensor, located in the paper feed entry-
slot, can occasionally become covered in paper-dust causing
the shredder to run despite no paper being fed into the machine.
Switch the shredder off at the rear of the machine and carefully
clean the sensor using a cotton-swab.
Service
We recommend these machines are serviced every 6 to 12
months by a Rexel service engineer – see https://www.leitz.com/
service for enquiries about maintenance contracts.
Waste Electrical and Electronic
Equipment (WEEE)
• At the end of its useful life, your product is considered to be
WEEE. As such, it is important to note that WEEE is not to be
disposed of as unsorted municipal waste. It is to be collected
separately such that it can be disassembled so its components
and materials can be recycled, re-used, and recovered (burned
for energy content in the production of electricity).
• Public collection points have been set up by municipalities for
the collection of WEEE, free of charge to you.
• Please return your WEEE to the collection facility nearest your
home or office.
• If you have difficulty locating a collection facility, the retailer that
sold you the product should accept your WEEE.
• If you are no longer in contact with your retailer, please contact
. Please
ACCO for assistance with this matter.
• Recycling of WEEE is geared toward protecting the environment,
protecting human health, preserving raw materials, improving
sustainable development, and ensuring a better supply of
commodities in the European Union. This will be achieved by
retrieving valuable secondary raw materials and reducing the
disposal of waste. You can contribute to the success of these
goals by returning your WEEE to a collection facility.
• Your product is marked with the WEEE symbol (wheelie bin with
an X through it). This symbol is to inform you that the WEEE is
not to be disposed of as unsorted municipal waste.
Guarantee
• Operation of this machine is guaranteed for two years within the
date of purchase, subject to normal use. Within the guarantee
period, ACCO Brands Europe will at its own discretion either
repair or replace the defective machine free of charge. Defects
due to misuse or use for inappropriate purposes are not covered
under the guarantee.
• Proof of date of purchase will be required. Repairs or alterations
made by persons not authorised by ACCO Brands Europe will
invalidate the guarantee. It is our aim to ensure that our products
perform to the specifications stated. This guarantee does not
affect the legal rights which consumers have under applicable
national legislation governing sale of goods.
• This guarantee does not apply to Australian customers—see
warranty on page 104.
7