Changing The Batteries; Care, Maintenance And Storage - ProMed IRT-100 Instrucciones De Empleo

OPERATING THE DEVICE
Backlighting
The device has 3 different backlighting options for indicating events/results to you.
Backlighting
Lighting up green for 5 seconds
Lighting up green for 3 seconds after
measurement in body mode
Lighting up red for 3 seconds after
measurement in body mode

CHANGING THE BATTERIES

DE
As soon as the battery charge gets too low, this is indicated in the display by the battery
symbol .
In order to change the batteries, remove the battery cover (E) from the battery compartment
EN
(G) and remove the old batteries (H), now insert 2 new batteries into the battery compartment
(G) and slide the battery compartment cover back onto the thermometer.
FR
Note!
• Use only high quality batteries.
• Never mix new and old batteries or batteries from different manufacturers
IT
• Remove discharged batteries immediately.
• If you do not want to use the device for a long period of time, you should remove the
batteries in order to prevent potential leakage.
ES

CARE, MAINTENANCE AND STORAGE

NL
The Promed IRT-100 thermometer is splash-proof and can thus be easily cleaned and
disinfected.
RU
• The measuring sensor (A) is the most sensitive part of
the thermometer, clean it and the entire device with a
cotton cloth soaked with 70% isopropyl alcohol only.
PL
• Never use scouring agents, thinners or benzene to
clean the device.
• Never immerse the thermometer in water or other
TR
liquids.
• Take care not to scratch the surface of the display.
• If you do not use the device for a long period of time,
AR
please remove the batteries from the device in order
to prevent damage to the thermometer from leaking
batteries.
Meaning
Device start/preparation for measurement
The measurement result is lower
than 37.5 °C (99.5 °F).
The measurement result is higher
than 37.5 °C (99.5 °F).
24