Descargar Imprimir esta página

Beta 1760 / IR800 Manual Del Usuario página 26

Termómetros infrarrojos sin contacto

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47
°C or °F Selection Push Button
Select the temperature measurement units (
key (
.)
The word "Max" indicates the maximum registration displayed each time in the
time elapsed from the moment when the activation/de-activation "ON/OFF" key
is pressed to the moment when it is released
MEASUREMENT OPERATION
1
Hold the thermometer and point it towards the surface where temperature measurement is
intended.
2
Pull and hold down the Trigger and proceed with the measurement operations. If the state of the
battery.is.good,.the.display.lights.up..Replace.the.battery.if.the.display.does.not.light.
3
Once the trigger has been released, the phrase HOLD appears on the display, to indicate that the
last.reading.has.been.memorized..In.MAINTENANCE.mode,.press.the.UP.button.to.activate.or.
de-activate the the laser. Press the DOWN button to turn on or off the retroillumination.
4
The instrument will automatically power down after approximately 7 seconds after the trigger is
released. (Unless the continuous measurement mode has not been activated)
C.or.
F).using.the.
C/
o
o
o
6
F.selection.
o

Publicidad

loading

Este manual también es adecuado para:

1760Ir800