Safety In Your Working Environment; Operating Safety Tips; Operating The Machine; Starting Off - Menzer LHS 225 Manual Original

2.2 SAFETY IN YOUR WORKING ENVIRONMENT

Ensure that your work area is always well-ventilated and well-lit so as to prevent accidents. In order to
distract you while sanding.
your place of work is properly aired so as to reduce dust levels.

2.3 OPERATING SAFETY TIPS

This long-neck sander should only be operated by skilled professionals who have carefully read and un-
derstood the operating and maintenance instructions contained in this manual and who are familiar with
vapours. Extended inhalation of dust generated from construction work can be harmful for the respiratory
injury.
the operating area of the long-neck sander.
can begin.
Only use this long-neck sander for the treatment of dry surfaces.
do not attempt to carry out jobs too far above your head as this could result in you losing your balance.
no parts have become broken or have fallen off the machine. These factors could impede the operation
of the long-neck sander.
Ensure that the power cable is always outside the surface area that is being treated.
The sanding of lead paints or coatings can release toxic gases and should either be carried out by a pro-
fessional with appropriate safety equipment or be avoided entirely. Do not attempt to treat any materials
that contain asbestos.
4 EN
then should you set the machine aside. Always store the long-neck sander in a dry room. During breaks
the power supply.
- Immediately switch off the machine if it begins to make unusual noises or movements. Only have repairs

3. OPERATING THE MACHINE

3.1 STARTING OFF

has been transported:
has already been placed inside the vacuum cleaner.
Make sure that no power cables or hoses can impede your work space.
Attach a suitable sanding disc to the driving disc of the long-neck sander.
Hold the long-neck sander tightly and with both hands - either by grasping the tube or by using the addi-
- tional handle. It is possible to guide the long-neck sander by holding any point of the main tube. The addi-
tional handle can be mounted in different positions so as to adjust the leverage and reach of the machine.
Do not put down or set aside the long-neck sander while it is attached to a power supply.

3.2 OPERATING THE MACHINE

3.2.1 Connecting a vacuum cleaner

vacuum cleaner.
Please note that the use of an unsuitable vacuum cleaner can increase the concentration of dust particles
in your working environment to such an extent that you may suffer damage to your respiratory organs.
come tangled.
-
EN 5