Huygens One Manual Del Usuario página 8

'One' - Radio Controlled
EN Setting the clock
1. Insert the battery into the battery holder. After approximately
15 seconds, the movement will automatically move the hands to the 12
position.
2. The movement will then start searching for the radio signal and
will automatically set the correct time within 3-8 minutes.
If the clock does not display the correct time, it may be due to not
picking up the radio signal correctly. Place the clock near a window for
several hours to improve reception. Once a correct radio signal has been
received, the clock will automatically set itself to the correct time.
Please note: Automatic synchronizations take place every day to ensure the accuracy of
the clock. If the time is not automatically adjusted during the transition to daylight saving
time, you must relocate the clock to improve reception.
In the rare case that the clock is not functioning properly, you can reset
the movement by pressing the RESET button.
Maintenance
-Never expose the one to direct sunlight.
-Never clean the one using detergents. Only use a soft dry cloth.
Warranty
5 year warranty against material and workmanship defects (except
battery). The warranty is only valid if a proof of purchase is provided.
See our website for more information regarding warranty procedures.
10