Connecting The Camera - Oregon Scientific DS 9541 Guia De Inicio Rapido

All manuals and user guides at all-guides.com
1. Insert the CD-ROM into your computer's CD-ROM drive. The installation
program will start automatically. If it does not start automatically, please do
the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2. The Software Installer will appear.
3. Select the language you wish to use for the installation.
4. Click on 'Install driver'to start the installation of the camera driver.
5. Follow the on-screen instructions.

Connecting the camera

The camera can be connected to the computer in two different modes: Mass
Storage Device, or as a PC camera for video conferencing on the Internet.
1.1 Connecting as a mass storage device
1. Turn the camera on by pressing the ON/OFF button.
2. Press MENU button and press RIGHT key to select the Setup setting.
3. Press button to set USB connection.
4. Press or button to choose the Disk Drive mode.
5. Press OK to confirm.
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as
a removable disk.
1.2 Connecting as pc camera
When you connect the camera as a PC camera, you can use the camera as a web
cam for video conferencing on the Internet by using Windows NetMeeting or
Windows Messenger.
(You must install the driver before connecting the Digital Camera to your computer.)
1. Turn the camera on by pressing the ON/OFF button.
2. Press MENU button and press RIGHT key to select the Setup setting.
3. Press button to chook USB connection.
4. Press or button to choose the PC camera mode.
5. Press OK to confirm.
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as
a web camera.
11