DeLOCK 11482 Manual Del Usuario página 2

English
Description
This KVM switch by Delock is a convenient solution for connecting two computers with DisplayPort output to a
DisplayPort monitor.
Additionally there is an HDMI output for connection of two monitors, of which only one can be active at a time.
Specification
• Connectors:
Input:
2 x DisplayPort female
2 x USB 3.0 Type-B female
4 x 3.5 mm 3 pin stereo jack female (audio)
1 x 3.5 mm 3 pin stereo jack female for optional IR-receiver
1 x DC 5 V power connector screwable
Output:
1 x DisplayPort female
1 x HDMI-A female
2 x USB 3.0 Type-A female (USB 3.0 Hub)
2 x USB 2.0 Type-A female (keyboard + mouse)
4 x 3.5 mm 3 pin stereo jack female (audio)
• Switching via button, mouse button, hotkey or infrared remote control
• Automatic switching when turning a PC on or off
• Supports HDCP 1.4 and 2.2
• Supports HDR
• Supports MST (Multi-Stream Transport)
• DisplayPort output: Resolution up to 7680 x 4320 @ 30 Hz (depending on the system and the connected hardware)
• HDMI output: Resolution up to 3840 x 2160 @ 60 Hz (depending on the system and the connected hardware)
• Robust metal housing
• Dimensions (LxWxH): ca. 178 x 75 x 26 mm
System requirements
• PC with DisplayPort female + USB Type-A female
• Monitor or TV with DisplayPort or HDMI interface
• Connection cables
Package content
• KVM switch with USB and audio
• Remote control
• 2 x cable USB 3.0 A male to USB 3.0 B male, length ca. 1.0 m
• External power supply
• Mounting brackets and screws
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Hardware Installation
Connect a USB keyboard and mouse to the console ports of the KVM.
Connect all audio cables to each computer, the KVM, and speakers if necessary.
Connect other USB devices to the USB 3.0 Hub if necessary.
Connect the DisplayPort monitor to the DisplayPort output of the KVM.
Optional:
Connect the HDMI monitor to the HDMI output of the KVM.
Connect the included DC 5V power adapter to the DC port of the KVM.
Connect the DisplayPort cable between the DisplayPort output of the computer and the DisplayPort input of the KVM.
Connect the USB 3.0 cable to the USB-A port of the computer and to the USB-B upstream port of the KVM.
Now press the power button.
Turn on the computer and make sure that the USB ports are enabled and working properly.
-2-