Installation - Glacier bay 4211N-0001 Guía De Uso Y Mantenimiento

Installation

1
Installing the spout assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Thread the spout assembly (C) onto the faucet
body (A) and wrench-tighten the spout
assembly (C) to ensure a tight seal.
2
□
□
C
A
4
Installing the faucet assembly
Mount the faucet (A) to the laundry sink. The two
mounting tabs should face the front of the laundry
tub, the single tab should face the rear of the basin.
Tighten the mounting screw (B) from the single
tab to secure the faucet (A) into place.
B
A