Starting The Device; Turning The Device On Or Off; Switch Function; Tableau - Rehan Acuity Speech Manual De Instrucciones

5 Starting the device

Turning the device on or off

The on/off switch of the Acuity Speech is located at the
lower right hand side on the back of the monitor. To start
up or shutdown the device, hold it for 2 seconds until you
hear the start up or shutdown tone. The Acuity Speech
always starts up in Acuity Basic mode - Live view.

Switch function

Press the On/Off button once while the device is on to toggle between the multiple modes
of the Acuity Speech: Acuity Basic mode, Acuity Speech mode and external input.
The external input is only available when an HDMI cable is connected to one of the HDMI
ports at the back of the Acuity Speech and to an external device.

Tableau

The Acuity Speech contains a tableau on which you can place your reading material. The
tableau can move from left to right and from front to back.

Brake handle

In front of the tableau of the Acuity Speech you will find a single brake handle with which
you can control the movement of the tableau. The handle has 4 positions:
Left = The tableau can be moved freely.
Middle-left = Free movement from left to right.
Front to back movement can be adjusted by 5 millimeter increments.
Middle-right = Free movement from left to right, front to back movement is blocked.
Right = Tableau position is locked.

6 Acuity Basic mode - Live view

When you turn on the device it will start in Acuity Basic mode - Live view. In the Live view
you will see the tableau or the documents on it.
Controls
The controls can be found below the screen and consist of touch sensitive pads:
The functions of these buttons are as follows:
Acuity Speech
EN
7