Technical Data - MASTERLINE 481 Instrucciones

ANY USE DIFFERENT FROM THE ONE STATED IN THIS LEAFLET IS NOT ALLOWED!
This manual gives instructions about the use of the tool according to the lay-out and its technical features.
- The tool is bound to a professional use and therefore the instruction manual can never replace a convenient operator experience.
- This booklet is to be considered an integrant part of the tool itself and must be preserved for future reference for the whole tool life.
- In case of lost or damage, user can ask the manufacturer for a new manual, making reference to machine serial number, model and year of
production, as shown on the machine name plate.
- The manufacturer reserves at any time the right to bring both production and instruction manual up-to-date without any obligation to modify
previous machines and manuals.
- The user may at any time contact the manufacturer to get further information on the correct use of the machine.
- The manufacturer is not responsible in the following cases:
misuse of the machine
o
lack of maintenance
o
interventions or modifications of the machine not previously authorized by manufacturer
o
partial or full non-observance of instructions
o
exceptional events
o
INTENDED USE OF THE TOOL
The equipment described in the manual herein is intended to strap packaging with plastic straps using a vibration welding system.
Any other usage is not allowed.

TECHNICAL DATA

Noise / Vibration Information
Measured values determined according to EN 415-8 Appendix A. Typically the weighted sound pressure level of the product is (L
The noise level when working can exceed (L
Vibration total values (triax vector sum) determined according to EN 60745-1:
Vibration emission value ah < 4.94 m/s
standardized test given in EN 60745-1 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool ìs used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should al so take into account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organization of work patterns.
Technical features
Length
Width
Height
Strap quality
Sealing type
Welding efficiency
Neck type
Strap width
Strap thickness
Max tension
Max tension speed
Cycles per load
Reload time
Battery
Charger
Weight (including battery)
MODEL TABLE
Model
481
OPERATION INSTRUCTION
Before using the tools the operator must have read and understood this manual.
Installation
The user must have read and understood the present manual before starting to use the tool, carefully check the technical characteristics table to be
aware of the performance and the limitations of the strapping tool you are going to use.
Serious injuries and damage to people or equipment may result if the equipment is not correctly used, if the strap is over tensioned and/or if adequate
straps are not used, in relation with the product to be packaged (sharp edges, high temperatures, etc.), due to sudden sagging or breakage of the
straps.
Masterline
481
) 96.33 dB(A). Wear hearing protection!
WA
2
. The vibration emission level given in this information sheet has been measured in accordance with a
75 ÷ 85% OF BREAKAGE LOAD OF THE USED STRAP
ROUND PACKAGE (minimum diameter 700 mm)
AKKU POWER BATTERY CHARGER 220 V - EUROPE
Code
C159990815Z
481
mm 330
mm 105
mm 165
PP / PET
VIBRATION
9 ÷ 16 mm.
0.5 ÷ 1.05 mm
1.800 N / 170 Kg.
14 m/min
140 ÷ 170
22 min.
BATT.14V - 1,5 Ah BL1430 SANYO
Kg. 3.6
Strap width
9 - 16 mm.
481
) 85.35 dB(A).
pA
ENGLISH - 3