Input Sensitivity - JB Systems PRO 16X Manual De Instrucciones

CONNECTIONS
Make sure all faders are at 'zero' and all devices are off before
making any connection.
IMPORTANT: Always switch on your audio input sources such as
turntables or CD players first, then your mixer, and finally any
amplifiers. When turning the power off, always reverse this
operation by turning off amplifiers first, then your mixer and then
your input devices.
SPECIFICATIONS

Input Sensitivity

Mic ..................................... 0,5 mV/50K Ohm
Phono ................................ 3mV/50K Ohm
Tape .................................. 150 mV/100K Ohm
Tuner ................................. 150mV/100K Ohm
Output level
Master ................................ 0,22 V/600 Ohm (max. 5V/600 Ohm))
THD ................................... 0.1 % (rated output)
Frequency Response ........... 20Hz - 20KHz, ± 1dB (RIAA ± 2dB)
S/N Ratio
Mic ..................................... 60 dB
Phono ................................ 60 dB
Tape .................................. 75 dB
Tuner ................................. 75 dB
Phones Output .................... 8 Ohm Load (max. 100mV)
Dimensions (LxWxH) ........... 317 x 210 x 70 mm
Pro 16X 4