Remote Kit Installation; Installation Set Up - Dimplex BFRC-KIT Guia De Instalacion

Remote Kit Installation

Installation Set Up

1. Open steel curtain (remove
glass doors if applicable).
2. Remove two screws on log
grate and remove log grate.
(FIGURE 1)
3. Pull front edge of plastic ember
bed grate up and forward until
rear tab releases from the
ledge located at the bottom of
the mirror. (FIGURE 2)
!
NOTE:Log set fits tightly
into firebox, some force may be
necessary to remove.
4. Locate and remove the two
screws on the removable
bracket. Remove the bracket.
(FIGURE 3)
5. Locate and depress the
mounting tabs on the plug
connector to remove the
'dummy plug'.
(FIGURE 3)
!
NOTE: Keep the 'dummy plug
in a safe place. You will need it if
you decide to uninstall the remote
control to operate the fireplace
manually.
FIGURE 1
Screws
Manual Controls
FIGURE 2
Back
Ledge
Rear
Tab
Side Section
FIGURE 3
Removable
Bracket
Bracket and "Dummy Plug"
Log
Ember
Bed
Front
Edge
Depress
Mounting
Tabs
5