Publicidad
Idiomas disponibles
Idiomas disponibles
Label
Item
H
D5 metal washers
I
M6x14 screws
J
M6 nuts
L
M6x20 screws
M
M8x20 screws
N
M6x30 screws
O
M8x30 screws
P
Plastic Washers
Q
Plastic spacers
R
Metal Washers
IMPORTANT:
Read this instruction guide thoroughly before you assemble and install this product.
If you have any questions regarding any of the instructions or warnings, please
contact your local distributor for assistance.
Image
Quantity
2
2
2
4
4
4
4
8
4
2
XTA311
CAUTION!
• Do not use with items heavier than the maximum weight indicated here to
avoid instability.
• This product must be securely attached to the TV. If it is not properly
installed, it may fall resulting in possible injury and/or damage.
• Use the mounting screws provided and DO NOT OVER TIGHTEN them.
• This product contains small parts that could represent a choking hazard if
swallowed. Keep all these parts away from children.
• This product is intended for indoor use only. Using this product outdoors
may result in personal injuries and/or damage.
• Use protective gear as needed to assemble and install this product.
2. Assembly instructions
A. Regular installation
Narrow mode
1a-1. Using a screwdriver select among the M4x14 (E), the M5x14 (F), or the
M6x14 (G) screws, and the two D5 metal washers (H) to attach them to the
brackets. If the screws are not suitable for your soundbar, use a wrench to
attach the two M6 nuts (J) and the two M6x14 screws to the soundbar. (The
screw type will depend on the soundbar).
TV soundbar
mount
E/F
H
G
J
I
Publicidad
