Courtyard Creations TCS19SW Instrucciones De Montaje

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
PARTS LIST
PART
MATERIAL CODE
NO.
1
TCS19SW-CS05-1
2
TCS19SW-CS04-1
3
62TMS20SKY101
4
13C??B30008001
Note:
The tiles can be easily broken, be careful when
removing them.
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the
(#1) rim by using bolts (#5). Keep the bolts loose.
See Figure 1.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
!
Do not sit or stand on this table.
!
Do not discard of any of the packaging until you have checked that you have all of the parts and
!
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
!
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
!
Quote the following FQC NO. when contacting the service center.
!
V-3
INTENDED FOR RESIDENTIAL USE ONLY.
TCS19SW
PART
TABLE TOP
LEG
CENTER CONNECTOR
TILE
underside of the table top
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
DO NOT RETURN TO STORE!
STOP
PAGE 1 OF 2
5
17C40A0705001YX
Q'TY
1 6
17C40A0708001YX
4 7
17FC05020601-YX
1 8
17KAA0101----Y4
4 9
17KAC3101----Y3
FIGURE 1
2
1
BOLT M6*15
BOLT M6*20
WASHER d6.5*D10*1.6
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 10MM
2
2
2
15
#5 BOLT M6*15
COURTYARD CREATIONS INC.
4
4
4
1
1
5