Settings - Kingston MobileLite Wireless Manual De Usuario

Settings and Configuring MobileLite Wireless
Using the MobileLite Wireless App, you can customize the wireless network settings for MobileLite Wireless. The
default settings are: Device Name: MobileLite Wireless, Visibility Status: ON, Wireless Channel: 11, and
Security: None.
To access MobileLite Wireless's Network Settings, please follow these steps:
1. Select the Kingston MLW icon on your iPad, iPhone, or iPod touch device.
2. Select the Device Name link, i.e.,MobileLite Wireless (192.168.200.254).
3. Select the settings icon (gears symbol.)
Name – commonly referred to as an SSID, or Service
Set IDentifier, this field allows you to specify a device
name (between 1 and 32 characters) that will broadcast
in the list of available wireless networks
iPhone, or iPod touch device.
MobileLite Wireless as seen in Figure 11.1.
Battery Life -- indicates amount of charge left in battery
Visibility Status – this gives you the option to hide or
unhide the SSID specified in the 'Name' field. By default,
the visibility status is turned 'ON'. If you wish to turn this
feature 'OFF', the device name will NOT be broadcasted
in the list of available wireless networks on your iPad,
iPhone, or iPod touch device; however, you can still join
the Wi-Fi network by entering the device name manually
using the menu option, 'Other...'.
Wi-Fi Channel – this setting allows you to select a
specific frequency channel used to communicate with
other devices on your wireless network. The default
setting is Channel 11 (2.462 GHz.)
WPA2 Security – this option helps prevent unauthorized access to your MobileLite Wireless device by
prompting users for a password. Simply enter a password in the 'Password' field and confirm it by re-typing it
in the 'Confirm Password' field and tap the 'Done' button to save the MobileLite Wireless settings.
1
I
f the visibility status has been turned off, you can still join the MobileLite Wireless network by entering the SSID manually on your iPad,
iPhone, or iPod touch, as long as you know the 'Device Name' (Step A). Please note that a password will be required if the security option is
enabled.
Document No. 480-13FUM-001.A00
on your iPad,
The default name is
1
Kingston MobileLite Wireless
Figure 12.1 – MobileLite Wireless Network

Settings

Page 12 of 14