Control Panel - Morphy Richards MR47082 Manual Del Usuario

Cafetera de filtro de 12 tazas
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
47076MEE-Rev1-Q6
19/9/08
4
Close the reservoir lid.
5
Slide the jug into the coffee maker
ensuring it sits correctly on the hot
plate. The jug lid must be in place
during the brewing process,
otherwise the non-drip valve will not
open, causing the filter to flood.
6
Plug the filter coffee maker in at the
wall socket and switch the coffee
maker ON. The LCD display will
illuminate to show the coffee maker
is working.
7
Press the ON/OFF button to start
the brewing process. The red power
light will glow to show the coffee
maker is working
8
Hot water will start to flow through
the coffee grounds and into the
glass jug as coffee.
9
When the coffee has been made,
serve as required. The anti-drip
valve will prevent any remaining
coffee dripping onto the hot plate.
Ensure that the jug is replaced on
the hot plate after serving. While the
coffee maker is switched ON the
hot plate will keep the coffee warm.
10 Switch off the coffee maker when
the jug is empty or the coffee is no
longer required.
WARNING: The coffee maker
and hot plate are hot and
remain hot for some time after
switching off.
11 Allow the unit to cool.
12 Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
Refilling
1
Switch off the coffee maker and
allow 3 minutes to cool before
refilling with cold water.
Buttons key
ON/OFF
Auto timer
Warmer
9:29 am
Page 5

CONTROL PANEL

Switching on
When the machine is switched on,
the display will illuminate.
To set the time, press the HOUR
button. It is a 24 hour clock with AM
or PM denoted.
Then press the MINUTE button.
To brew at a pre-set time
Press the PROGRAM button.
Note: If no buttons are pressed, the
display will revert to the time display
within 10 seconds.
Press the HOUR button.
Then press the MINUTE button to
set the desired start time.
Press the AUTO button (green light
glows).
Note: Press the AUTO button again
to cancel pre-set brewing.
To brew manually
Press the ON/OFF button (red light
glows).
Note: Press the ON/OFF button
again to cancel brewing.
g
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mr47083Mr47084

Tabla de contenido