Promise Technology SMARTSTOR NS4600 Guia De Inicio Rapido página 20

SmartStor NS4600 Quick Start Guide
Setting up a Network Drive on a Macintosh PC
Before you can access the SmartStor from a Macintosh (Mac OS X) PC, you
must configure the SmartStor to communicate with the Mac OS.
In PASM
1. Start PASM.
See "PASM in your Browser" on page 13, "PASM in SmartNAVI" on page 14,
or "PASM in Bonjour" on page 15.
2. Click the Protocol Control icon, then click the Macintosh tab.
3. Click the Enable button.
4. Optional. Type a message in the Login Message field.
5. Click the OK button to save your settings.
The optional login message appears on the Welcome screen when you log
into SmartStor from a Macintosh PC.
To set up Macintosh file sharing:
1. In the Tree, click the Sharing Setup icon, then click the Windows/
Macintosh/FTP Sharing tab.
2. Check the Macintosh protocol box.
3. Choose a folder from the Folder Name dropdown menu.
4. In the User/Group list, highlight the name of a user or group.
Group names are preceded by the @ character.
5. Under Permissions, choose a permission level for this user or group:
• Deny Access – Visible only, cannot open
• Read Only
• Read and Write – Default
6. Click the OK button to save your settings.
7. In the confirmation box, click the OK button.
You can now access the specified folder from a Macintosh PC.
The Macintosh file sharing enables Macintosh PCs to access folders on the
SmartStor. In this case, access is given for the PUBLIC folder.
On the Macintosh Desktop
1. From the Go menu, choose Connect to Server.
2. In the Connect to Server dialog box, type afp://192.168.1.214 and click the
Connect button.
Note that the IP address shown below is only an example. See "Finding the
SmartStor's IP Address" on page 12.
Click the + button to add this IP address to the Favorite Servers list.
20