Prodipe R.S.L Manual Usuario página 7

Dear Customer,
We would like to thank you for the confidence you have placed in us by purchasing a Prodipe
product.
The R.S.L is a stereo ribbon microphone. Its ribbon thickness is only 2.2 microns. The ribbon
transducer is comprised of two powerful neodymium magnets and high pure iron alloy.
The R.S.L is actually comprised of two separate matched ribbon microphones. They are
mounted in close proximity on a vertical axis, places one above the other and each aimed 45
degrees from the center. When held vertically, connector down, the upper microphone is the
left channel and the lower microphone is the right channel.
The R.S.L extension 5-pin cable come with an adapter which splits into left and right 3-pin
XLR connectors, each output the left channel signal and the right channel signal.
Safety precautions:
• Remember to disable the phantom power (48 V) from those preamps that have it
because this power may destroy the ribbon when certain conditions are present.
• Ribbon mics can withstand high acoustic levels without being affected; however, because
of the thinness of the ribbon (a few millionths of a millimetre) they cannot tolerate being
blown on directly. Therefore, if you want to prevent permanent damage to the ribbon,
you should avoid having the mic in draughty conditions or making sudden movements
with it.
• We recommend that you store the mic in an upright position because if you store it
horizontally the ribbon is inclined to become deformed under its own weight and slacken,
thereby lowering the sound quality.
Specifications:
Polar Pattern : Bi-directional
Frequency Response : 30-18kHz
Sensitivity:-50dB±3dB : 0dB=1V/pa at 1kHz
Output Impedance:200Ω
Load Impedance :1000Ω
Max. Input SPL140dB (at 1kHz≤1% T.H.D)
Self Noise:17dB A
Prodipe and its distributors decline all responsibility for any damage caused by using this appliance in a way
that does not conform to the conditions of use as set out above.
Copyright © 2010 IPE Music