Chicco THERMO DISTANCE Manual Del Usuario página 22

Recommended separation distances between portable and mobile RF communications equip-
ment and the Chicco Infrared No Contact Forehead Thermometer REF. 00006931000000
The Chicco Infrared No Contact Forehead Thermometer REF. 00006931000000 is intended for use in
an electromagnetic environment in which radiated RF distances are controlled. The customer or the
user of the Chicco Infrared No Contact Forehead Thermometer REF. 00006931000000 can help pre-
vent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Chicco Infrared No Contact Forehead Thermometer
REF. 00006931000000 as recommended below according to the maximum output power of the com-
munications equipment.
Rated maximum
output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distanced in meters (m) can be estimated using the equation applicable to the frequency of the trans-
mitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer. NOTE 1 At 8- MHz and 800 MHz, the separation distance for the higher
frequency range applies. NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects and people.
SYMBOLS KEY
CE markinkg (Notified body 0197 - TÜV Rheinland LGA Products
GmbH)
Refer to instruction
Type BF applied part
Operating instructions
Warning
Protection level against solid foreign objects and dripping water
(15° tilted)
LOT
Lot Number
Separation distance according to frequency of transmitter m
150kHz to 80MHz
d=1.2 √ P
0.12
0.38
1.2
3.8
12
80kHz to 800MHz
d=1.2 √ P
0.12
0.38
1.2
3.8
12
22
800kHz to 2.5GHz
d=2.3 √ P
0.23
0.73
2.3
7.3
23