COX Contour 1 Instrucciones

Getting started
is easy.
Instructions
Contour 1
Here's what's in your kit:
Power cord Coax cable HDMI cable
12:30
Cox Remote Contour Box
And here's what you'll need:
Your original TV remote TV
Here's what to do:
1 2 3
1
Plug in the Contour box
First, connect the coax cable 1 to an active cable outlet and to the
"Cable from Wall" port on the Contour box.
Then connect the HDMI cord 2 to your TV and the Contour box.
Lastly, connect the power cord to an electrical outlet and the Contour box.
3
TIP: Plug the coax cable into a centrally located cable outlet or use the
same outlet where the old device was connected.
2
Activate the Contour box
Turn on your TV. Then using your original TV remote, press the source or input
button and select the correct HDMI connection.
Then go to Cox.com/install or call 1-800-234-3993 from a phone on your
account and we'll help you finish the activation.
3
Set up your new Cox remote
Press and hold the mute and select buttons until one of the top buttons
- cable, TV, AUX, DVD - blinks twice. Then press and release the TV button.
Point the Cox remote at the TV while pressing the select button until the
TV turns off. Release the button and you're done.
We're here to help.
 Tips
Channel Lineup: go to Cox.com → Products → TV Channel Lineup.
On Demand : watch movies and your favorite shows on your schedule.
SM
Splitter: installing two devices from the same cable outlet requires a splitter.
?
FAQs
Why isn't my Contour box working?
Try rebooting — just unplug the power cord from the wall, wait 10 seconds,
then plug it back in. It may take a few minutes to reset. Also, make sure all of
the connections are tight and completely plugged in.
How do I fix a "No Input" message on my TV?
The input/source might not be set correctly. To fix this, press the "input" or
"source" button on your TV remote until you select the HDMI connection that
matches the port your HDMI cable is plugged into on your TV.
How do I make the text on the Guide larger?
Press the "settings" button on the Cox remote and follow these steps: Guide
Options → Other Settings → Guide Text Size → pick the size you want → press
the "select" button on the remote. Visit Cox.com/remote-help for more.
Can I use my Cox remote to control my DVD player?
Sure, just follow the same steps you followed when setting up your Cox
remote, but instead of pressing the TV button, choose the DVD button.
APP: Cox app has 24/7 support & helpful videos
WEB: Cox.com/installhelp & Cox.com/learn
CHAT: live chat on Cox.com/chat or text an agent at 54512
CALL: 1-888-556-1193
ACCESSIBILITY: Cox.com/accessibility
Help us send zero waste to landfills by recycling the kit once
you're finished. It's made with 100% recyclable materials.