(*) are available also the versions DLD1500-L070-DA, DLD1500-L070-DX, DLD1000-H070-DA, DLD1000-H070-DX, DLD1500-H070-DA and DLD1500-H070-DX, with all same characteristics. The
only difference is the pre-set output current: 0.7 A instead 1.2 A.
Power
Model
(**)
[W]
DLD1500-L120-DA
1500
DLD1500-L120-DX
1500
DLD1000-H120-DA
1042
DLD1000-H120-DX
1042
DLD1500-H120-DA
1563
DLD1500-H120-DX
1563
(**) the DLD1000 are available only with High Input Voltage.
Resumen de contenidos para Enedo DLD1000/1500 DA/DX Serie
Página 1
ERIES IP66 IMPORTANT: this installation manual has been intend to be consulted together the datasheet which has to be regarded as a complementary part of it. Datasheet are accessible through the ENEDO website link herein below provided: https://enedopower.com/led-drivers/programmable-led-drivers/dld1000-2-channel-constant-current-led-drivers/ https://enedopower.com/led-drivers/programmable-led-drivers/dld1500-3-channel-constant-current-led-drivers/ RODUCT...
Página 2
Entretien: Ces produits ne sont pas réparables par le client. Servicing: These products are not customer serviceable. cliente. Riparazioni consentite solo ed esclusivamente al personale ENEDO et leurs agents agréés sont uniquement autorisés à ENEDO and their authorized agents only are authorised to specializzato ed autorizzato da ENEDO.
Página 3
Manutenção: Estes produtos não são reparáveis pelo cliente. Servicio: estos productos no se pueden reparar ni cambiar de werden. Reparaturen dürfen nur von ENEDO und ihren Apenas a ENEDO e seus agentes autorizados poderão realizar cliente. Reparaciones permitidas única y exclusivamente al autorisierten Vertretern durchgeführt werden.
Página 4
NSTALLATION NSTRUCTIONS Orientation and Tc Dimensions ORIZONTAL ERTICAL The distances between the LED drivers (each other or to the side wall) depends from several factors: - indoor (box/cabinet/area dimensions) or outdoor use - type and amount of ventilation (T - number of LED drivers and chosen installing orientation The distances must be calculated to stay within the maximum T allowed for the Fixing Point (4x)