GRAPHITE 58G867 Instrucciones De Uso página 10

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
DETAILED SAFETY RULES FOR DEMOLITION HAMMER OPERATION
●
Do not touch the power cord when it is damaged or fractured during hammer operation. Immediately
remove the cord plug from the mains socket. Power cord shall be replaced by qualified electrician.
●
When working with demolition hammer, always wear anti-splitter goggles or glasses, protective gloves
and shoes. Use earmuff protectors to prevent hearing damage.
●
Do not expose the demolition hammer to rain. Do not operate the demolition hammer in moisture and
with no proper illumination of the workplace.
●
You can insert power cord plug into mains socket only when you are absolutely sure that the hammer is
switched off with the switch button. When you finish working with the demolition hammer, remove the
plug from mains socket immediately.
●
During operation of the demolition hammer its power cord must always be placed behind the power
tool. Do not pull the hammer by the power cord.
●
When working with the demolition hammer, hold it with both hands and keep your body in firm
position.
●
Remove the plug from mains socket when the hammer is not in use or before starting any tasks related
to working tool replacement, repair, maintenance or adjustment.
●
Do not allow persons under 16 years old to use the demolition hammer.
●
Do not allow children to have access to the hammer.
●
Use only original parts when repairing the demolition hammer.
●
Use external dust extraction system whenever possible.
●
Always use dust-mask when operating the demolition hammer.
PRIOR TO OPERATION
●
Bear in mind that you can spot hidden electrical cables, gas and water pipes. First check the area where
you plan to work with demolition hammer using voltage and metal detector.
●
Use appropriate voltage. Mains voltage should match the voltage on the rating plate of the power
tool. Demolition hammer is designed to work with supply voltage 220 – 230 V.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used, ne-
vertheless there is always a small risk of operational injuries.
CONSTRUCTION AND USE
Demolition hammer is a hand-operated power tool with insulation class II. The tool is driven by single-
phase commutator motor with rotational speed reduced with gear transmission. Power tools of this type
are widely used for works in concrete, brick and similar materials. Range of use covers repair and building
works, and any work from the range of individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1.
Tool holder
2.
Tool holder bolt
3.
Clamping knob for additional handle
4.
Additional handle
5.
Switch
6.
Switch lock button
DEMOLITION HAMMER
58G867
10