Raikko TOUCH Instrucciones De Manejo página 9

English
ContRoL pAneL
The TOUCH BT has a touch screen operating control panel on the
®
top. Touch the display in the centre with your fingers to activate it.
All the functions are then operated by touch.
pAIRInG
After switching on the TOUCH BT
will hear a beeping sound. Activate the Bluetooth
smartphone, mobile phone or computer and pair your device with
the TOUCH BT . Once connected, the LED light (12) will be blue.
®
It is not possible to pair several devices at the same time. Only one
device can connect to the TOUCH BT
Press and hold the Bluetooth
Further information can be found in the user manual of the device
you are using with the TOUCH BT
swItCHInG oFF/dIsConneCtInG
Slide the on/off button right to switch off the TOUCH BT
opeRAtInG wItH BLUetootH
Once connected, you can play music and other audio through the
TOUCH BT . The volume can be controlled by your device. You can
®
also change the volume on the TOUCH BT
and − (4) buttons until you reach the ideal volume. A beep will sound
when you reach the maximum volume.
16
TOUCH Bluetooth Stereo Speaker
®
, it will be in 'Pairing Mode'. You
®
interface on your
®
at one time.
®
button to go back into 'Pairing Mode'.
®
.
®
.
®
ConneCtIon
®
itself. Press the + (6)
®
English
The maximum range of the radio signal is 10 metres. Large
obstacles, such as furniture, walls and electronic devices can limit
the range.
When turning on the TOUCH BT
volume settings.
If the paired device supports this function, it is possible to control
the playback function remotely from the TOUCH BT
Briefly press the play/pause button (8) once to start or stop
playback. Briefly press the forward button (9) once to move forward
to the next track. Briefly press the back button (7) once to restart
the current track or press several times in a row to go back to
previous tracks.
UsInG wItH A MoBILe pHone
When using with a Bluetooth
®
answer calls by pressing the telephone button (5) briefly (shown by
the phone symbol). End the call by pressing the button again.
Reject calls by holding down the telephone button.
AUdIo oUtpUt wItH A CABLe ConneCtIon
To play audio using a cable, connect the Line IN cable into the
appropriate socket (3). Connect the other end of the cable into the
headphone socket of your smartphone, mobile, MP3/4 player or
your computer or laptop's audio output.
TOUCH Bluetooth Stereo Speaker
®
, it will be set to the middle of the
®
.
®
-enabled mobile phone, you can
17