Replacement Of Fuses - Grant GD100 Manual Del Operador

6.3

Replacement of Fuses

230v
Disconnect the unit from the power supply socket. Remove the IEC power plug from
the rear of the unit. Press down the drawer catch. Pull out the fuse drawer, check and
replace with the correct fuses if necessary, as follows:
Two off, 1.25 x 0.25 inch ceramic quick acting rated:-
250V
Push back the drawer and replace the IEC plug.
120v
Disconnect the unit from power supply socket.
Locate fuses on rear panel next to power cable inlet.
Use a screwdriver of the correct size to turn the fuse holder a quarter turn anti- clockwise
to release the fuse holder.
Check and replace with the correct fuses if necessary. The fuses should be:
Two off, 1.25 x 0.25 inch ceramic quick acting rated:-
250V
Replace fuse holder.
17090 Version 15 - June 2009 83S
Page 23
10AF
20AF
www.grant.co.uk
GD100, GD120
Operating Manual