Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL AND INSTRUCTIONS
USE
- Make sure that the gun is disconnected from the power supply.
- Release and remove the cartridge tube.
• Bring the (grease dispensing) plunger trigger to the end of the stroke.
• Fit in the cartridge or pour grease by means of a spoon or through a pump.
• Tighten the cartridge tube onto the gun head.
• Fit the upper end of the tank into the loose grease container.
•
• Tighten the cartridge tube onto the gun head.
instructions. Release the plunger before use. To proceed with grease dispensation, press the trigger.
Grease dispensation
grease will be delivered; when supply is completed, the trigger must be pressed again, for more grease to be delivered.
centre.
The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force
in your country.
several times during the warranty period, the expiry date of this warranty will remain unchanged. This warranty will not cover
changes are made, or if the pneumatic tool is forced or sent to the customer service in pieces. This warranty explicitly excludes
The Technical Brochure is available at:
Via A. Volta 18
20845 Sovico (MB)
ITALY
8
EN
Publicidad
