Declaration Of Conformity - MILLET SUMMIT Manual De Instrucciones

INSPECTIONS
Regularly inspect your helmet. If there is any sign of wear or damage, replace your helmet. Please
feel free to show your helmet to a licensed Millet salesperson or to get in touch with our customer
service department.
REPLACEMENT
This helmet was designed to absorb impact by warping or breaking. If the helmet has suffered a
major shock or was involved in an accident, it must be replaced even if it looks like it is in a good
state externally because the damage may not be visible. Never use a helmet for longer than five
years after the manufacture date (see label affixed to the inside of the helmet).
It must not be repaired.
SPARE PARTS
This product does not have any spare parts.

DECLARATION OF CONFORMITY

The SUMMIT PRO helmet has been designed in accordance with EN 12492:2012/UIAA 106:2013
standards and Regulation (EU) 2016/425 and is certified by Apave, notified body number 0082. EU
declaration of conformity available on: www.millet.fr/conformity-declaration.html
WARRANTY
The Millet warranty applies for 2 years for all products. This warranty covers faults of
manufacture or abnormal wear of the product, which is determined by the Millet
after-sales service. Theft, breakage and normal wear and tear of the product are not covered
by this warranty.
«In accordance with Articles L.211-4 and the following of the Consumer Code and articles 1641
to 1649 of the French Civil Code, the seller is obliged to deliver goods conforming to the contract
and to answer for any existing compliance failures when delivering the goods. Therefore, in accor-
dance with the provisions of the Consumer Code, the item you have
selected is guaranteed against any manufacturing defect for a period of 2 years from
the date of issue. It also benefits from a warranty against hidden faults. These warranties
do not cover misuse or wear and tear resulting from improper use
of the product.»
CAUTION
The helmet is supplied with a manual: read it in full before using and cleaning the helmet.
This helmet must be adjusted for a perfect fit when worn for optimal protection.
Any helmet which has been subjected to impact must be replaced immediately.
Do not use oil, cleaning fluids, paints, transfers or other substances on the helmet.
Clean the helmet with neutral soap and water.
3