Maintenance; Information About Maintenance - Seca 703 Manual De Instrucciones Y Garantía

Malfunction
Er:X:16
... is displayed?
... when the Enter key
(send/print) is pressed
Er:X:71
and
played?
... when the Enter key
(send/print) is pressed
Er:X:72
and
played?

9. MAINTENANCE

9.1 Information about maintenance

62 •
Oscillation of the scales has occurred, preventing
determination of the zero point.
- Restart scales
Data transmission not possible, wireless module
is disabled.
is dis- - Activate wireless module (see "Activate wire-
Data transmission not possible, no wireless group
set up.
- Set up wireless group (see "Set up wireless
is dis-
Your seca scales leave the factory with an accuracy
greater than ±0,15%. To preserve this level of accuracy
the product must be set up carefully and serviced regu-
larly. We recommend having it serviced every 3 to 5
years depending on how often the scales are used.
Cause/Remedy
less module (SYS)" on page 56).
group (Lrn)" on page 56).
ATTENTION!
Incorrect measurement due to improper
maintenance
– Make sure that maintenance and repair are
only carried out by an authorised service
partner.
– You can find your local service partner at
www.seca.com or just send an e-mail to
service@seca.com.