Moulinex LA MOULINETTE Manual De Instrucciones página 12

- Never remove the lid until the blade (C) have
come to a complete stop.
- Unplug the appliance each time after use and
before any cleaning operation.
- To remove the blade (C)
grinder/chopping bowl (B) in one hand and
press down on the blade button with your
thumb.
- Now remove the blade (C) from inside the grin-
der/chopping bowl (B) before serving your pre-
paration.
Hints
- Important: you will obtain a better chopping
consistency by operating in pulses instead of
continually.
- Press for the required time you need to get the
chopped consistency you want.
- To obtain a finer consistency, use the spatula to
release food that has become stuck during
chopping and re-distribute evenly inside the
grinder/chopping bowl (B).
- Over time, the blade (C) can become blunt
and will need to be replaced.
A new blade = better performance.
- Let the appliance cool for 2 minutes before
using again. Never use the appliance empty.
Recommended times:
Ingredients
Parsley
Onions
Shallots
Garlic
Rusks
Almonds
Hazelnuts
Walnuts
Parmesan
Tender meat
(pieces of first category)
Tough meat
(pieces of third category
or cheap cuts)
• For very hard meat as shoulder, please use
150gr per cycle of 6s.
• Wait 2 min between each cycle.
, first take the
6
Maximum Maximum
Quantity Time
20 g 6 sec
250 g 12 sec
150 g 9 sec
140 g 10 sec
50 g 5 sec
250 g 9 sec
200 g 12 sec
150 g 10 sec
100 g 10 sec
330 g 6 sec
150 g 6 sec
BLENDER JUG FUNCTION
(ACCORDING TO MODEL)
- Place the blender jug (E) on the work surface
and not onto the motor. All handling operations
must be performed with the blender jug placed
on the work surface, never fitted to the motor
base (A) .
- Put the ingredients to be blended in the
blender jug (E), pouring in liquids first followed
by solids.
- Fit the lid (F) to the blender jug (E). Never place
the blender jug (E) on the motor base (A)
without its lid firmly fitted in place (F).
- With the lid on the blender jug (E), position it on
the motor base (A) and turn until it slots cor-
rectly into position
- Plug in the appliance and start up by turning
the On/Off button (H) to the right to "I"
use it for a maximum of 30 seconds only, then
let the appliance cool for 2 minutes before
using again.
- To stop the appliance, move the On/Off button
(H) to the left to "0".
- Never put your fingers or any other object in the
blender jug when the appliance is running.
- Do not operate the blender jug without its lid
and measuring cap.
- Do not operate the blender jug empty.
- Wait until the appliance has come to a
complete stop before removing the blender jug
from the motor (A).
CAUTION : Never pour or blend ingredients into
the blender jug if their temperature is above
80°C (175°F). When blending hot ingredients,
keep your hands away from lid and cap to avoid
any risk of burns.
VEGETABLE SLICER AND JUICER
FUNCTIONS
Do not process more than 0.5 kg of fruits or
vegetables per operation, and each operation
should not exceed 1½ minute.You can carry out
up to 3 successive operations with a minimum of
2 minutes pause between each one.
VEGETABLE CUTTING FUNCTION
(ACCORDING TO MODEL)
- Use the vegetable cutting disc (K) to grate
(face A) and slice (face B).
- With the appliance unplugged, position the
vegetable cutter unit (I) on the motor base (A)
and turn it until it slots into place correctly.
- Fit the feed disc (J) and then the vegetable
cutter disc (K) onto the vegetable cutter unit (I)
3 .
8
7 .
7 and