Control Device - Lanaform RELAX MASS Manual Del Usuario

HOW TO USE
EN
1) Details:
- 2 massage heads
- 'Shiatsu' massage
- 3 massage areas (upper back / lower back / full back).
- 1 demo 'function'
- Vibrating seat
2) Description of the "RELAX MASS":
The strap system:
"RELAX MASS" has a system of straps enabling you to fix it to any chair. Simply pass the straps around the chair back,
bring them together and fix them to each other using the two adhesive ends.

Control device:

'Demo' mode (2)
Full back
massage (3)
Vibrating seat (6)
3) Using the "RELAX MASS":
"RELAX MASS" operates via an adapter. First connect the end of the power supply cable to the female input connector
located on the right-hand side of the seat. Then plug the adaptor into a power socket. Once connected to the electrical
socket, the "RELAX MASS" is ready to use.
- On/Off
Starting or stopping the appliance is controlled by simply pressing the red button (diagram, point 1).
Back:
• 'Demo' mode (diagram, point 2)
This mode consists of a sequence of different massages. This function is valuable since it offers a varied massage.
• Manual mode
You also have the luxury of selecting a specific area or the whole of your back; depending on the desired massage area:
- The whole of your back (diagram, point 3).
- Your lower back (diagram, point 4).
- Your upper back (diagram, point 5).
Seat:
You also have the benefit of a vibrating seat that you can choose to enable or not (diagram, point 6).
4
DIAGRAM
On/Off (1)
Upper back
massage (5)
Lower back
massage (4)