Removing The Heater From The Package; Moving And Transporting The Heater - Master BVS 170E Manual De Instrucciones

• In order to avoid the risk of fire, make sure the heater is on a
firm, flat surface when it is being used or is hot.
• When moving or storing the heater, keep it level to avoid fuel
loss.
• Keep children and animals away from the heater.
• Disconnect the heater from the mains supply when not in use.
• When controlled by a thermostat, the heater may come on at
any moment.
• Never use the heater in frequently used rooms or in bedrooms.
• Never obstruct the air intake (rear end) or the air output (front
end) of the heater.
• When the heater is hot, connected to the mains supply or in
use, it must never be moved, handled, filled up with fuel or
serviced in any way.
REMOVING THE HEATER
FROM THE PACKAGE
1. Remove all the packaging materials used to protect the heater
during transport.
2. Lift the cardboard box.
3. Remove all the materials that fix the heater to the pallet.
4. Remove all the materials that fix the stack to the pallet (for
series BVS only).
5. Place the stack on the fume discharge pipe (for series BVS
only).
6. Delicately lower the heater on the platform.
7. Verify that the machine has not been damaged during
transport. If the heater appears damaged, promptly report all
visible damages to the dealer where it has been bought.
PACKING AND STORAGE
1. Verify that the heater is not damaged.
2. Place the heater on the pallet and fix it in place using
appropriate materials.
3. Remove the stack and fix it on the pallet using appropriate
materials.
4. Cover the heater with the cardboard box.
5. Fix the cardboard box on the pallet using appropriate
materials.
6. Store the heater in safe and dry place. Do no stack several
units.
MOVING AND TRANSPORTING
THE HEATER
WARNING: The following steps must be carried out be-
fore moving the heater: Turn the heater off, following the
instructions in the previous section; disconnect the plug
from the power supply and wait for the heater to cool.
The heater suspended version, mounted on a support structure
and fixed in place with wires or chains, the heater must be lifted
with a fork-lift truck or a similar piece of equipment.
Figur 2 - Direct heater BS version.
Figur 3 - Indirect heater BVS version.
2
en