Before First Use; Using Your Blender - Brentwood Appliances JB-220B Instrucciones De Operación Y Seguridad

Before First Use

IMPORTANT: Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
WARNING:

Before your first use, wash the Glass Jar, Filler Cap, Lid, and Blade
Assembly using warm soapy water. Rinse thoroughly and dry before
assembling the Blending Jar.

Blender Jar assembly is as follows:
1. Turn the Blending Jar upside down and place on a flat surface.
2. Add the Blade to the Base and top with the Rubber Gasket.
3. Place the Blade Assembly with the Gasket between the Glass and
the Blade.
4. Turn the Base clockwise until it is tightly secured.
5. Turn the assembled jar right side up. You may choose to add
water to the jar over a sink to make sure the base was positioned
correctly and does not have leakage.

Do not rush while washing the Blade Assembly. The blades are
extremely sharp and cause easily cause injury if not handled carefully.

Using Your Blender:

WARNING: Avoid contact with moving parts.
1. Place the Motor Base on a clean, flat surface.
2. Fill your Glass Jar with your favorite ingredients; do not fill past the Max
line.
CAUTION: Add liquids first and do not overfill the product or operate it
when empty.
3. Insert the Glass Jar to the Motor Base turn until the slots are in place and
lock.
4. Add the lid with the Filler Cap in place.
Note: The Filler Cap allows you to add ingredients while blending.
5. Connect Plug to the nearest 120 V AC electrical outlet.
6. Pulse your beverage to the consistency and speed of your preference.
Note: Push the Hi/Low Button for Speeds 1-6, and leave the button out for
High Speeds 7-12
6